Want to give Engineering byDesign a test drive?
MN Engineering byDesign (MN EbD) is excited to announce a series of Engineering byDesign “Action Labs”!
These Action Labs will be a “Pre-Conference” activity and are an “Add-on” to the February MTEEA Conference. You must be registered for the February MTEEA Conference to register for the Action Labs which are described below.
MN EbD will be conducting “Action Labs” for both the MS (Grades 6-8) and HS (Grades 9-12) courses. The Action Labs will be led by ITEEA Engineering byDesign National Teacher Effectiveness Coaches (NTEC) and MN Engineering byDesign Authorized Teacher Effectiveness Coaches (ATEC). These action labs will use a semi “flipped” learning process along with a “Hands on” learning experience.
The Action Labs will consist of a 45-60 minute pre-recorded “nuts and bolts” of EbD and introduction to the course being presented. The recording will be sent to you the last week of January for you to view prior to the Action Lab date.
This will be followed up with a ZOOM training session. During this two hour, “Hands on” portion of the class, you will experience the EbD BUZZ learning management system, use the LMS as both a student and a teacher. The trainer will lead you through a lesson and the associated activity and a larger project. For some of the Action Labs, this may be split into two sessions that allow the participant to complete a project with more than one iteration before sharing with other participants.
Action Labs will be held February 1- 4, 2021. Sessions will run from 3:30 pm - 5:30 daily.
|Day||Feb 1||Feb 2||Feb 3||Feb 4||
These Action Labs will be a “Pre-Conference” activity and are an “Add-on” to the February MTEEA Conference.
The cost of each Action Lab has been reduced to $25 for this pre-conference. You must be registered for the February MTEEA Conference to take advantage of this reduced price.
Go here to register for the February MTEEA Conference.
REGISTER HERE for pre-conference Action Labs.
Once you have completed registration for your Action Lab(s), use the tool below to make payment.
Please complete Action Lab registration and payment by Friday, January 22. Please make sure you have registered for the February MTEEA Conference before completing the above Action Lab registration and payment. Thank you.
MS Action Lab series: Course Descriptions HERE
Exploring Technology (Grade 6)
Invention and Innovation (Grade 7)
Technological Systems (grade 8)
HS Action Lab Series: Course descriptions HERE
Foundations of Technology
Advanced Technological Applications
Engineering Design (Capstone)
You can also register without participation in the MTEEA Virtual Conference! Use this form to register!
The cost of the Action labs without MTEEA Conference registration is as follows:
1st lab registration, per participant:
MTEEA member: $75 Check your MTEEA membership status here.
Non members: $100
Each additional lab is $50 per participant.
PayPal payment information can be found here
Please complete registration by January 22, 2021.